87
Other functions must be set and allowed in the Glory Fit
app (Fig. 3), and their operation depends on both the
specific phone model and settings as well as the current
version of the smartwatch. These are, for example,
notifications of incoming calls, messages, notifications
from social media, alarm clock, “Do not disturb” mode
(DND mode), physiological cycle, non-activity reminders,
activating the display by twisting the wrist and others.
Important notifications, recommendations
and FAQs
1. To save the values measured and the current date and
time, make sure you synchronise the smartwatch with
the app on a daily basis. During the night, the values
measured by the smartwatch may reset.
2. This product is not a medical device. Neither the
smartwatch nor the app are intended for the diagnosis,
treatment or prevention of illnesses and symptoms
thereof. The values measured are illustrative and may
differ from values measured by certified medical devices
as well as because of the method of measurement and
tightness of the strap. The sensor on the reverse side
of the smartwatch must be in contact with the wrist,
and the strap must be tight. If the strap is loose and the
sensors dirty, the precision of the measurements will be
compromised.
3. In order to ensure correct date and time settings, the
smartwatch must be paired with a phone. Then the date
and time will be set automatically.
4. The smartwatch has the IP67 degree of protection. We
recommend avoiding contact of the smartwatch with
water under pressure, fast and rapidly flowing water,
spraying and hot water and steam, because when using
the smart watch, due to wear and tear of the case or its
EN
To Next Page
Loading...
