Lisbona
English
46 05060030 03 30-07-2015
1. Instructions for multiplexing
To multiplex the cabinet proceed as follows:
1 Remove the wooden frame used for shipment
by unscrewing the foot and removing the
washer.
2 Screw the foot back on without the washer, to
a maximum height of 25 mm.
3 Position the cabinet and remove the packing
material.
Cut the wire holder clips.
Remove the plastic shelf fasteners.
Remove the shelves.
4 Remove the power pins from the shelf
canopies.
Remove the base, backs and honeycomb.
5 Place the cabinets next to one another.
To Next Page
Loading...
