19
Wall Mounting
You will require the following tools:
1. Bubble level
2. Drill and drill bit
3. Hammer
4. Screwdriver
Use the Mounting Bracket as a template
to mark the locations of the holes on
your wall. Drill holes in the wall using a
drill bit that matches the size of the dry
wall anchors.
Step 1.
Insert the dry wall anchors. Using a
hammer, tap the end of the wall anchors
lightly to fully secure them in the wall.
Fix the Mounting Bracket to the dry wall
anchors with the provided screws.
Step 2.
Locate the sides of the AromaPro
®
BT to the Mounting Bracket.
WARNING: Always make sure the AromaPro
®
BT is mounted upright.
Step 3.
To Next Page
Loading...