My diffuser isn’t turning on.
29
SET ENT
SUN
SAT
FRI
THU
WED
TUES
MON
02:00
-20-
SET
x 5 seconds
Troubleshooting
My diffuser display is locked.
To unlock the display, simply press and hold the SET button for 5 seconds.
The AromaPro
®
BT display locks after 10 seconds if not in use.
Check to make sure the power adapter is correctly plued into the DC power jack and the
electrical source.
If hours of operation timer is set incorrectly and you are trying to diffuse during the time that
the machine is programmed to be off, the AromaPro
®
BT will not scent.
My diffuser is making a gurgling sound.
It’s likely that you’ve overfilled the oil vessel. Simply pour out some of the oil in the oil vessel.
Be sure to only fill to the shoulder of the vessel and not to the very top.
To Next Page
Loading...