Machine cleaning:
1. We recommend cleaning the AromaPro every 2 months.
2. When changing oil clean out the diffuser.
3. If scent diffusion becomes weak, cleaning is recommended.
Cleaning steps:
1. Empty the oil from a canister and replace with 20ml of rubbing alcohol.
2. Screw the bottle into the diffuser and turn the machine ON for 20 min to clean out the
diffuser head and tube.
3. Pour out the rubbing alcohol (no rinsing required) and replace with your favorite aroma
oil blend.
Tips:
You can start using the scent machine immediately after cleaning it. There is no need to
wash the tube.
• If the screen crashes, press ENT and hold for 5 seconds to reset the machine and bring
it to factory settings.
• After installation make sure the diffuser, bottle and pump box are ALWAYS vertical and
not tilted or on its side.
• When the machine is on pause and not diffusing the atomization icon will be displayed.
20
MAINTENANCE
IMPORTANT
To Next Page
Loading...
