ARRI LOCPRO 35 - Page 34

34
Mode 3: Setup speed
Press ”Mode” Key twice
• Select desired speed by repeatedly pressing ”Reset”
key (higher value) or ”Film” key (lower value).
Frame Rate Selection 50 Hz projector:
Display fps fps max. Shutter Mode of operation
48/48 24 48 48 rps Cine Mode
50/50 25 50 50 rps Cine Mode
24/50 24 50 50 rps Telecine Mode
30/50 30 50 50 rps Telecine Mode
Frame Rate Selection 60 Hz projector:
Display fps fps max. Shutter Mode of operation
48/48 24 48 48 rps Cine Mode
60/60 30 60 60 rps Cine Mode
24/60 24 60 60 rps Pull down Mode
30/60 30 60 60 rps Telecine Mode
Functions
„Reset“- key
„Film“- key