41
6.8 Infrared
Remote Control
The following functions can be selected via remote control:
• Start: To start, press the key for the required frame rate
Note: This applies only to the standard settings 50/50
and 60/60. If these settings were changed in the
”Mode” function (Telecine Mode or Pulldown
Mode), then this frame rate prevails and is
selected. See chapter 6.5.2.
50 Hz-Version:
Menu key: 6 fps 12 fps 25 fps 50 fps Mode
48/48 6 12 24 48 Cine Mode
50/50 6 12 25 50 Cine Mode
24/50 6 12 24 50 Telecine Mode
30/50 6 12 30 50 Telecine Mode
Functions
To Next Page
Loading...