Arris STARZ DSR-4470 Series User Manual

STARZ ENTERTAINMENT DSR-4470 SERIES QUICK START GUIDE
RF INPUTS: Connect RF inputs as labeled below.
ASI OUTPUTS: Connect ASI (or optional* IP) outputs as labeled below.
SIGNAL LOCK: Enter frequency and modulation parameters in the Quick Install menu to gain signal lock.
AUTHORIZATION: Contact Starz Affiliate Support for signal authorizations. (888) 783-2275, Opt. #2
Write down UA 1 and UA 2, as you will need these when calling 888-783-2275, Opt. #2 for authorization.
AUTHORIZATION
Hit the “OK” button with “Quick Install” highlighted as shown.
SIGNAL LOCK
Set and verify the following fields shown below:
Transponder 17 or 20
Symbol Rate 32.500
Input Port RF Port 1 or RF Port 3
Modulation Mode DVBS2
v. T2
PAGE 1 OF 2 (SEE REVERSE)
RF Port 1
1110.00 17
16APSK 32.500
RF INPUTS
G13-V
G15-V

Arris STARZ DSR-4470 Series Specifications

General

HDMI Output	Yes
Component Video Output	Yes
Composite Video Output	Yes
Coaxial Digital Audio Output	Yes
Ethernet Port	Yes
USB Port	Yes

Summary

Initial Setup and Configuration

RF and ASI Connections

Connect RF inputs and ASI/IP outputs as labeled on the device for signal reception.

Signal Lock Procedure

Enter frequency and modulation parameters in the Quick Install menu to achieve signal lock.

Device Authorization

Contact Starz Affiliate Support with UA 1 and UA 2 details for signal authorization.

Analog Hookup and Support

Analog and Relay Connections

Details on connecting Video, Audio 1/2, Relay, Cue Tones, and DTMF interfaces for analog output.

Power and Safety Information

Specifications for AC power input and important safety precautions regarding servicing.

Authorized Distributors

List of authorized distributors for purchasing additional IRDs, with contact details.