Arris DSR-7403 - User Manual

DSR-7403 INSTALLATION INSTRUCTIONS
The following instructions are for installation and authorization of an ARRIS DSR-7403 to receive HBO
and Cinemax services from Galaxy 14, Transponders 8 and 16 and Galaxy 15 transponder 19.
The DSR-7403 is designed for simple setup requiring only one (1) menu screen in the user interface, with
all other configurations completed by HBO’s satellite broadcast control system, upon authorization.
Follow the six (6) high-level steps below to setup your receiver and acquire the desired signal(s).
Steps
1. Rack mount the unit.
2. Connect two RF satellite inputs.
3. Connect ASI output(s).
4. Connect AC power.
5. Enter frequency and modulation parameters in the Quick Install menu, to gain Signal lock.
6. Contact HBO’s technical assistance and authorization hotline at 212.512.5666 to request unit
authorization.
Information is also provided on how to order a spare DSR-7403 unit to backup your production receiver.
The DSR-7403 user manual can be downloaded through the unit’s web interface using a PC connection
for additional operating instructions.

Summary

Rack Mount the DSR-7403

Create RF Connections

Create Output Connections

Connect to AC power

Front Panel Control Buttons

Explains the function of front panel buttons like Menu, OK, and arrow keys for navigation.

Manually Tune, to gain Signal lock

Quick Install Menu Configuration

Details on setting RF Port, Transponder, Frequency, and Modulation for signal acquisition.

Authorization

Connection to Headend Network

Explains post-authorization configuration and output program mapping for headend distribution.

Dont Forget Your Backup

Arris DSR-7403 Specifications

General

Type	Satellite Receiver
Video Outputs	HDMI, Composite
Ethernet	Yes
USB	Yes
HDMI	Yes
Input Ports	LNB Input
Audio Outputs	RCA (stereo)
Supported Resolutions	1080p