To Next PageTo Next Page
Need help?Do you have a question about the Arrow EN86-A and is the answer not in the manual?
Review manual and local building codes before starting construction.
Follow all instructions carefully during assembly for correct results.
Building must be anchored to prevent wind damage; foundation is necessary for stability.
Check all necessary parts against the parts list before assembly begins.
Select a dry and calm day for installation; avoid windy or wet conditions.
Two or more people should work together for easier and safer assembly.
List of basic tools and materials needed for construction and foundation preparation.
Choose a level area with good drainage and sufficient space for assembly.
Periodically clean and wax the exterior surface; touch up scratches promptly.
Keep the roof clear of leaves and snow to prevent damage.
Keep door tracks clear of debris and lubricate annually for easy sliding.
Check for loose screws, bolts, and nuts regularly and retighten as needed.
A plastic sheet under the floor with good ventilation reduces condensation.
Wash off part numbers; use silicone caulking for watertight seals.
Kits designed to add protection against heavy snow accumulation.
Kits for anchoring the building to the ground or a concrete slab.
An organizer with snap-in hangers for tools.
Systems for creating a foundation for plywood, sand, or stone.
Bars that help organize space and create an attic or workbench.
Units to help organize storage space on walls or floors.
Recommended kit for the best base, keeping stored items above ground.
Instructions for building a level and flat wood foundation platform.
Requirements for a level and flat concrete slab foundation at least 3-4 inches thick.
Importance of anchoring the entire floor frame after erection using various methods.
General| Brand | Arrow |
|---|---|
| Model | EN86-A |
| Category | Outdoor Storage |
| Language | English |
