Assembly
5
1. Take out left&right wings,and the avigation
aluminium bar.
2.Insert the aluminium bar into the steel tube
of the left wing and right wing,and make sure
the center position of the aluminum bar is in
the join of the two wings.
3.Connect wire of aileron servo to Y wire
of receiver.
4.Take out the stressful sheet of wing and
locked the left & right wings.
5.Screwed the nylon screws,fix the wings
in the fuselage.
6.Install control wire-steel of stabilizer wing
7.Fix the stabilizer wing in the fuselage with
screws.
8.Install the battery.
To Next Page
Loading...
