14
SPECIFICATIONS
Frequency Response 20 Hz – 22kHz ± 2 dBu
Max. Input Gain 60dB CH MIC. Input Main out (XLR, balanced)
50dB CH MIC. Input & REC. out (unbalanced)
60dB CH MIC. Input Mic. out (unbalanced)
60dB CH MIC. Input Mono out (unbalanced)
THD&N <0.03% @1kHz
Impedance Microphone input: 1.4kΩ
All other inputs 10kΩ or greater
Zone outputs 120Ω
Monitor Speaker output 8Ω
Monitor Line output 120Ω
Phantom power 48VDC
EQ Low: ± 10 dB - 100 Hz
High: ± 10 dB - 10 kHz
Zone Outputs +26dB (Balanced)
Monitor Line Output +15dB (Unbalanced)
Monitor speaker output 1 W rms / 8 Ω
Headphone output 0.5 W rms / 47 Ω
Connectors Inputs: Combo XLR/¼ Jacks, RCA
Outputs: Euroblock, Screw terminals
Power Requirements USA 110~120VAC 50/60Hz or 24VDC
Export units configured for country of destination
Dimensions (HWD) 5.1-inch x 19-inch x 7.5-inch
130mm x 483mm x 191mm
Weight 6.63 lbs. (3.0 kg)
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement. Therefore, specifications are subject to
change without notice.
To Next Page
Loading...
