5
PAN
Each of these controls adjusts the relative position of the associated input channel in the overall left-
right panorama. Fully counterclockwise is Left and fully clockwise is Right.
Rear Panel Controls
+48V PHANTOM POWER Switches (1-8)
These numbered switches control the application of phantom power to the corresponding numbered
rear-panel MIC XLR connectors. In the OFF position (up), no phantom voltage is applied. Moving the
switch down (ON position) applies phantom voltage. Note that when phantom voltage is applied, the
current supplied is limited to 7 mA for each leg of the balanced line.
To Next Page
Loading...
