Blacklist: Alert message will be generated once inbound /outbound number is in blacklist
System Setting
1.
The parameter is active to entire system instead of single channel.
2.
It is the pause time from first digit dialing to start recording. If the value is 0, the call will be
recorded entirely from pick up.
3.
The parameter setting is to avoid misdialing recording.
Recommend: 5s
4.
It limits recording time to avoid large size audio file.
5.
User can set interval time between two DTMF digits. If the interval time is more than 7s, the
latter DTMF digit will not be saved and shown in program. If the interval time is 0, all the
DTMF digits will be displayed. Recommend: 7s
6.
It is the interval time between ring tones. If the interval time is more that 7 s, the call will be
determined as a missed call. Recommend: >5s
7.
This parameter for inbound call DTMF receiving only. .
8.
The recording file will be saved as followed format
A. wav Normal audio file to be played by any PC.
B. avl Encrypted audio file to be played by specified PC program
C. xtr Encrypted audio file to be played by specified PC program.
9.
Enable /Disable to save missed call.
To Next Page
Loading...
Need help?
General