Aruba Instant On AP22 - User Manual

Aruba Instant On AP22 Access Point
Installation Guide
Rev01 | April 2020 1
The Aruba Instant On AP22 access point delivers high performance concurrent 2.4 GHz and 5 GHz Wi-Fi 6
(802.11ax) functionality with MIMO radios (2x2 in 2.4 GHz, 2x2 in 5 GHz), while also supporting legacy 802.11a/b/
g/n/ac wireless services
.
Package Contents
 1 x AP22 access point
 1 x Mount bracket
 1 x Ethernet cable
Hardware Overview
Figure 1 AP22 Front View
If you have ordered AP22 bundle, the package would also include a power supply unit to power the AP through
an electrical power outlet.
Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton,
including the original packing materials. Use these materials to repack and return the unit to the supplier if
needed.
System
Radio

Aruba Instant On AP22 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Frequency Bands	2.4 GHz, 5 GHz
Ports	1x Gigabit Ethernet (RJ-45)
Operating Temperature	0°C to 40°C
Power over Ethernet (PoE)	802.3af
Dimensions	160 mm x 160 mm x 37 mm
Weight	500 g
Mounting	Wall or ceiling
Maximum Data Rate	1774 Mbps

Summary

Package Contents

Hardware Overview

LEDS

The AP22 access point has two LEDs indicating system and radio status.

Ethernet Port

The AP22 features a 10/100/1000Base-T auto-sensing Ethernet port (E0) for wired connectivity and PoE.

Kensington Lock Slot

The AP22 includes a Kensington lock slot for enhanced security.

Reset Button

The reset button on the bottom of the device resets the access point to factory default settings.

Power

The AP22 can be powered by a proprietary Aruba adapter or via PoE. DC power takes precedence.

Cable Clip

A cable clip on the rear organizes the Ethernet cable; its use is optional.

Before You Begin

Identifying Specific Installation Locations

Locate the AP close to the coverage center, free from obstructions and interference sources for optimal RF propagation.

Identifying RF Absorbers and Interference Sources

Identify RF absorbers (concrete, natural items, brick) and interference sources (microwaves, cordless phones) affecting AP placement.

Access Point Installation

Installing to a Ceiling Tile Rail

Instructions for attaching the mount bracket and securing the AP to a ceiling tile rail.

Installing to a Solid Surface

Steps to attach the mount bracket to a solid surface like a wall or hard ceiling.

Verifying Connectivity

Mobile App Setup

Download and install the Aruba Instant On mobile app for setup and configuration.

Portal Login Setup

Set up the access point via a web browser by logging into the Aruba Instant On portal.

Electrical and Environmental Specifications

Electrical

Details on Ethernet port and power options including PoE and DC power.

Environmental

Operating temperature and humidity limits for the access point.

Safety and Regulatory Compliance

RF Radiation Exposure Statement

Equipment must be installed and operated with minimum distance for FCC RF radiation exposure limits.

Federal Communication Commission

Device complies with FCC Part 15 rules; potential interference must be managed.

Industry Canada

Device meets Industry Canada Class B apparatus requirements and RSS regulations.

European Union Regulatory Conformance

Wireless Channel Restrictions

Specific countries have indoor-only restrictions for the 5150-5350MHz band.

Medical

Contact and Support

Open Source Code

Information on licensing and obtaining source code for open source components used in the product.

Warranty Information

Details on the hardware product warranty and where to find more information.