Arylic BT10 - 5 Connection; Line in; Optical in; Line out

- 6 -
5.Connection
5.1 Line in
Use the 2-1 RCA cable or Aux 3.5mm cable to connect an audio source device that has RCA or AUX
output.
5.2 Optical in
Use an optical cable to connect to an audio source device that has optical output.
5.3 Line out
Use the 2-1 RCA cable or Aux 3.5mm cable to connect an amplier or active speaker.
5.4 USB Disk Drive
Plug in a USB disk drive with music les to the USB Type-A port to play music.
5.5 Connect to PC
Connect PC with the USB Type-C cable. If you use your own USB Type-C cable, please make sure it is
a Data link cable and not just a charging cable, or else your PC will not recognize the device. The USB
Type-C cable comes in the package has Data link.
5.6 Power
Connect the power adaptor with the USB Type-C cable and to the device’s USB Type-C port.