AS MOTOR Mulchmeister AS 84/2 LB User Manual (English)

Questions and Answers:

B
Brandon SotoAug 19, 2025
What to do if AS MOTOR Mulchmeister AS 84/2 LB Lawn Mower engine starts badly or runs irregularly?
- N
  Nancy SmithAug 19, 2025
  If your AS MOTOR Lawn Mower engine starts badly or runs irregularly, it could be due to the choke being closed, so you should open it. Another cause may be a soiled air filter, so you should maintain it. It could also be caused by poor quality, dirty, or old fuel, so you should always use fresh fuel. Also, the spark plug may be sooted, damaged, or have an incorrect electrode gap, so you should clean or replace it and check the electrode gap. Finally, the housing of the mower may be jammed.
M
Michelle LongAug 22, 2025
What to do if AS MOTOR Lawn Mower has uneven cut, lawn becomes unsightly?
- M
  Melanie ThomasAug 22, 2025
  If your AS MOTOR Lawn Mower produces an uneven cut and the lawn becomes unsightly, the blade may be dull or worn, so have it balanced and re-sharpened, replacing it if damaged. The speed may be too high for the cutting height, so reduce the speed and/or select the correct cutting height. The housing of the mower may be heavily soiled, so clean it. Finally, different tire pressures can cause this, so check the tire pressure.
J
Jordan FlynnAug 25, 2025
Why AS MOTOR Lawn Mower engine is smoking?
- G
  greenjohnAug 26, 2025
  If the AS MOTOR Lawn Mower engine is smoking, it could be because the air filter is soiled or drenched with oil, so you should maintain or replace it. It may also be that the oil level is too high, so you should have an authorised service centre lower the oil level to the marking.
C
Cassandra MooreAug 27, 2025
What to do if AS MOTOR Mulchmeister AS 84/2 LB Lawn Mower discharge channel is jammed?
- C
  Christopher BowenAug 27, 2025
  If the discharge channel of your AS MOTOR Lawn Mower is jammed, it could be because the mowed grass was too long or too damp, so adjust the cutting height and mowing speed to the mowing conditions. Other potential causes such as a worn blade or too low engine speed require an authorised service centre.
K
Kerry NobleAug 30, 2025
Why AS MOTOR Mulchmeister AS 84/2 LB engine gets hot?
- D
  Danielle RobinsonAug 30, 2025
  The AS MOTOR Lawn Mower engine may get hot if the ventilation grid is dirty. Clean the ventilation grid.
H
hartryanSep 2, 2025
What to do if AS MOTOR Mulchmeister AS 84/2 LB engine does not switch off?
- D
  Derek FordSep 2, 2025
  If the engine of your AS MOTOR Lawn Mower does not switch off, close the fuel valve. Other potential causes such as a defective switching off system require an authorised service centre.
W
whitegeorgeSep 4, 2025
Why AS MOTOR Lawn Mower mulching result with high plant material not satisfactory?
- J
  Jonathan WilliamsSep 4, 2025
  If the mulching result with high plant material is not satisfactory with your AS MOTOR Lawn Mower, the speed may be too high. Reduce speed.
P
Parker NicholsSep 7, 2025
Why AS MOTOR Mulchmeister AS 84/2 LB Lawn Mower mulching result with low plant material not satisfactory?
- R
  Robert NguyenSep 8, 2025
  If the mulching result with low plant material is not satisfactory with your AS MOTOR Lawn Mower, it may be because the plant material is ejected too quickly. Increase speed.
C
christopherjohnsonSep 10, 2025
What to do if AS MOTOR Lawn Mower tires become flat?
- M
  Michael KennedySep 12, 2025
  If the tires of your AS MOTOR Lawn Mower become flat, it is because thorns or other sharp objects damage the tires. If necessary, use tire protection gel (authorised service centre).
C
Christina WheelerSep 13, 2025
Why AS MOTOR Mulchmeister AS 84/2 LB blade slides?
- N
  Nancy KellerSep 13, 2025
  To resolve the issue of the AS MOTOR Lawn Mower blade sliding, replace the friction discs.

AS MOTOR Mulchmeister AS 84/2 LB Specifications

General

Engine Type	4-stroke
Cutting Width	84 cm
Cutting Height Adjustment	Central
Mulching System	Yes
Engine	Briggs & Stratton
Drive	Rear wheel drive
Displacement	344 cm³
Fuel Tank Capacity	5 liters

Summary

Preface and Intended Use

Customer Data Entry

Instructions for filling in device details for orders and contacting the dealer.

Permitted Application

Defines the approved uses for cutting grass and similar vegetation in maintained areas.

Prohibited Applications

Lists activities the device must not be used for, such as cutting hard objects or shredding.

Explanation of the Symbols

Instructional Symbols

Symbols used within the manual text to denote special dangers or procedures.

Device Markings

Symbols displayed on the machine itself to inform the user about hazards.

Technical Identification Plate

Details concerning the device's type plate and the information it provides.

Safety Instructions - Initial

Initial Information and User Restrictions

Reading instructions, dealer guidance, user eligibility, and operational hours.

Fuel Handling Safety

Precautions for refueling, storage, spill management, and fire hazards.

Emergency Response Measures

First aid procedures for fuel exposure and measures to take in case of fire.

Pre-Operation Checks

Visual inspection for safe working condition, including blades and fasteners.

Safety Instructions - Operation

Precautions During Operation

Guidelines for safe operation, starting, stopping the blade and engine.

Mowing Preparation and Safety

Personal protective measures, area preparation, and mowing precautions.

Safety Instructions - Slopes and Maintenance

Slope and Fire Hazard Safety

Precautions for mowing on slopes and managing fire hazards.

Post-Operation and Maintenance Safety

Procedures for after use, maintenance, and repair safety.

Device Description

Control Elements

Throttle Lever Operation

Controls engine speed and output.

Drive Lever with Parking Brake

Engages drive and applies parking brake.

Blade Clutch Lever

Safety device to engage/disengage the blade.

Handlebar Adjustment Features

Features for lateral and height adjustment of the handlebar.

Engine Stop Switch Function

Turns the engine on and off.

Assembly and Delivery

Scope of Delivery

Lists items included with the device.

Unpacking Procedures

Steps for removing the device from its packaging.

Guide Bar, Handlebar, and Transport

Handlebar Adjustment Instructions

Instructions for positioning the handlebar and guide bar.

Loading onto Transport

Using ramps and securing the device for transport.

Mowing Information and Starting

Mowing Best Practices

Tips for effective and safe mowing, including blade sharpness.

Mowing High or Wet Grass

Strategies for challenging conditions like tall or wet grass.

Fuel Requirements

Type of fuel, storage recommendations, and E10 petrol usage.

Tanking Up and Starting Procedures

Fuel Filling Procedure

Steps for adding fuel safely, managing pressure.

Engine Oil Level Check

Importance and method of checking engine oil level.

Cutting Height Adjustment

How to set the blade height for optimal cutting.

Starting the Device

Step-by-step procedure for engine start, including choke usage.

Blade Operation and Driving

Blade Engagement and Disengagement

Process to start, stop the blade and associated safety notes.

Oil Pressure Switch Function

How the oil pressure switch protects the engine.

Drive Engagement and Speed Control

How to move the device and adjust driving speed.

Reverse Gear Operation

How to use reverse gear and associated safety precautions.

Steering and Turning Control

Using brake levers to control direction.

Switching Off and Parking

Engine Shutdown and Parking Procedure

Steps to turn off and park the device safely, including securing it.

Maintenance and Cleaning - Overview

Maintenance Schedule Overview

Table outlining components, actions, and maintenance intervals.

Device Cleaning Procedures

How to clean the machine thoroughly after use.

General Inspection Guidelines

Regular checks for parts, connections, and cables.

Lubrication and Transmission Checks

Chain lubrication and transmission checks.

Engine Maintenance Basics

Engine care, cooling requirements, and manufacturer instructions.

Maintenance - Specific Procedures

Maintenance Preparations

Steps before performing maintenance work, including cooling and disconnection.

Detailed Cleaning and Inspection

Specific cleaning instructions and component inspection guidelines.

Engine Cooling and Care

Engine cooling requirements and manufacturer instructions.

Maintenance - Component Checks

Engine Oil and Spark Plug Checks

Procedures for checking oil level and spark plugs.

Air Filter Maintenance

Importance and care of the air filter for engine performance.

Drive and Parking Brake Checks

How to check and adjust drive and brake systems.

Maintenance - Blade and Storage

Blade Inspection and Replacement

Checking blade for wear, damage, and replacement criteria.

Blade Clutch Functionality Test

Testing the blade clutch mechanism for proper function.

Device Storage Guidelines

Instructions for storing the device in a dry, ventilated room.

Storage and Parts Information

Long-Term Storage Procedures

Preparing the device for extended periods of non-use.

Restarting After Storage

Steps to get the device ready after storage.

Spare Parts and Accessories

Information on spare parts, wear parts, and accessories.

Product Disposal Guidelines

Guidelines for environmentally responsible disposal of the device and materials.

Warranty Information

Troubleshooting - Engine Issues

Engine Start Problems

Diagnosing and fixing issues with engine starting.

Engine Running Irregularly

Identifying causes for poor engine performance.

Troubleshooting - Drive and Blade

Drive and Blade Operation Issues

Problems related to drive engagement, blade rotation, and vibrations.

Noise, Smoke, and Heat Issues

Troubleshooting unusual noises, smoke, or overheating.

Troubleshooting - Performance and System

Cutting and Mulching Quality Problems

Addressing uneven cuts and unsatisfactory mulching results.

System Malfunctions and Tire Issues

Troubleshooting jammed channels, braking, engine shut-off, and flat tires.

Technical Data

Declaration of Conformity

Related product manuals

AS MOTOR AS 530/4T MK

28 pages

AS MOTOR AS 530/2T MK-KAT

32 pages

AS MOTOR AS 26 2T

32 pages

AS MOTOR AS 900 ENDURO

40 pages

AS MOTOR AS 510 ProClip

24 pages

AS MOTOR AS 53 2T ES 4WD

36 pages

AS MOTOR AS-53-2T-4WD-RB

32 pages

AS MOTOR AS 800 FreeRider

32 pages

AS MOTOR ProClip AS 470 4T

29 pages

AS MOTOR AS 940 SHERPA 4WD RC

56 pages

AS MOTOR Allmaher AS 65 4T Honda

44 pages

AS MOTOR Mulchmeister AS 84/2 LB User Manual

Table of Contents

Questions and Answers:

AS MOTOR Mulchmeister AS 84/2 LB Specifications

Summary

Preface and Intended Use

Customer Data Entry

Permitted Application

Prohibited Applications

Explanation of the Symbols

Instructional Symbols

Device Markings

Technical Identification Plate

Safety Instructions - Initial

Initial Information and User Restrictions

Fuel Handling Safety

Emergency Response Measures

Pre-Operation Checks

Safety Instructions - Operation

Precautions During Operation

Mowing Preparation and Safety

Safety Instructions - Slopes and Maintenance

Slope and Fire Hazard Safety

Post-Operation and Maintenance Safety

Device Description

Control Elements

Throttle Lever Operation

Drive Lever with Parking Brake

Blade Clutch Lever

Handlebar Adjustment Features

Engine Stop Switch Function

Assembly and Delivery

Scope of Delivery

Unpacking Procedures

Guide Bar, Handlebar, and Transport

Handlebar Adjustment Instructions

Loading onto Transport

Mowing Information and Starting

Mowing Best Practices

Mowing High or Wet Grass

Fuel Requirements

Tanking Up and Starting Procedures

Fuel Filling Procedure

Engine Oil Level Check

Cutting Height Adjustment

Starting the Device

Blade Operation and Driving

Blade Engagement and Disengagement

Oil Pressure Switch Function

Drive Engagement and Speed Control

Reverse Gear Operation

Steering and Turning Control

Switching Off and Parking

Engine Shutdown and Parking Procedure

Maintenance and Cleaning - Overview

Maintenance Schedule Overview

Device Cleaning Procedures

General Inspection Guidelines

Lubrication and Transmission Checks

Engine Maintenance Basics

Maintenance - Specific Procedures

Maintenance Preparations

Detailed Cleaning and Inspection

Engine Cooling and Care

Maintenance - Component Checks

Engine Oil and Spark Plug Checks

Air Filter Maintenance

Drive and Parking Brake Checks

Maintenance - Blade and Storage

Blade Inspection and Replacement

Blade Clutch Functionality Test

Device Storage Guidelines

Storage and Parts Information

Long-Term Storage Procedures

Restarting After Storage

Spare Parts and Accessories

Product Disposal Guidelines

Warranty Information

Troubleshooting - Engine Issues

Engine Start Problems