ASA Electronics K-9 User Manual

Page 1 of 10
P/N 8007132
REV. B BJ
ASA Electronics TV/VCP Floor Console
Model K-9 With out Harness and Antenna
12 Volt DC powered remote controlled 9” television AVT-975
12 Volt DC powered remote controlled VHS Video Cassette Player AVP-7000
Installation Instructions
Audiovox Specialized Applications, LLC
23319 Cooper Drive
Elkhart IN 46514
1 (219) 264-3135
www.audiovox.com

ASA Electronics K-9 Specifications

General

Brand	ASA Electronics
Model	K-9
Category	Car Video System
Language	English

Summary

Installation Preparation and Safety

Required Tools for Installation

Lists the necessary tools for installing the TV/VCP floor console.

Personnel Requirement

Specifies that two people are needed for the installation process.

Step 1: Remove Console Face

Step 2: Install Brackets and Straps

Bracket Mounting

Details on mounting brackets using screws, avoiding the center hole.

Strap Preparation

Instructions for melting holes in open and closed straps using a soldering iron.

Pilot Holes for Strap

Guidance on pre-drilling pilot holes on the TV shelf for strap attachment.

Attach Harness and Straps

Procedure for attaching both straps and the customer-supplied harness.

Step 3: Install Console to Vehicle Floor

Step 4: Install VCP into Console

Step 5: Install TV into Console

Step 6: Replace Console Face