Ascend ALPHA - Handset Interface; The Memory Function

ASCEND ALPHA/OMEGA Handset Operation Manual
1.Handset Interface
8.8.8
1 2 3 4 M
▶ UP
▶ DOWN
▶ Setting Button M
▶ Height Memory Button 1
▶ Height Memory Button 2
▶ Height Memory Button 3
▶ Height Memory Button 4
2.Initialization Operation
▶ When the system is abnormal, or the handset displays "RST", it is necessary to
initialize the standing desk. The initialization operation is to press and hold <↓>
until the frame has reached the lowest position; Then press and hold <↓> for 5
seconds until you hear a beep.
3.Operation of the Desk
▶ Press <↑> to move the desk up until it reaches the highest position.
▶ Press <↓> to move the desk down until it reaches the lowest position.
▶ Press <↑> or <↓> in short desk runs a small distance.
4.The Memory Function
▶ This handset can store n memory points. Move the desk up or down to the
desired position; Press <M> in short until the display shows “S-”, and “-” flashes,
then press <1> to save position 1; Repeat the procedure to save the other positions.