Ascend L-200 - Assembly Instructions; Step 1: Stabilizer Attachment

STEP 1
ASSEMBLY INSTRUCTIONS
12
ASCEND L-200 PERFORMANCE ELLIPTICAL
Hardware Required
BOLT
#33 Carriage Bolt
M8*72( 4 pieces)
WASHER
#22 Arc Washer
D8Xφ20X2XR30
( 4 pieces)
NUT
#23 Domed Nut M8
( 4 pieces)
1. Attached the front Stabilizer(35) and the Rear Stabilizer(36) to the Main
Frame(40) with Carriage Bolt(33), Domed Nut(23) and Arc Washer(22).
S13