Ascend L-200 - Step 2: Sensor and Trim Connection

2. Connect the Sensor (16) and (38)together. Connect the eight-stop trim
(53) with the lower trim line (39) as shown in the right figure, fix the
Upright Post (15) with the Main Frame (40) with Bolt (26), Arc Washer (22).
STEP 2
ASSEMBLY INSTRUCTIONS
13
ASCEND L-200 PERFORMANCE ELLIPTICAL
Hardware Required
BOLT
#26 Bolt M10*45
( 4 pieces)
WASHER
#22 Bolt M8*16
( 4 pieces)
S6