Ascend L-200 - Step 5: Wire Connection and Computer Mounting

OTHERS
#17 End cap S13
( 2 Pieces)
#28 END CAP S17
( 6 pieces)
Hardware Required
16
ASCEND L-200 PERFORMANCE ELLIPTICAL
5. Connect Handle Pulse Wire (1a) to (4a), then connect Sensor wire (1b)
to 16. Fix the Computer (1) onto the Upright Post (15) with Screws (2).
Cover the nuts with caps (17) & (28)
STEP 5
ASSEMBLY INSTRUCTIONS
S13