16
ASCEND SE MAGNETIC SPIN BIKE
MONITOR
A- Battery
Load two 1.5V,AAA battery in the battery box on the back (after each battery replacement, all
values will be reset to "0")
B- Instructions
1. Automatic scanning (SCAN): open the screen or press the button to enter the SCAN state, all
the functions of the TIME-SPD-DIST-CAL-ODO-PUL will be automatically displayed on the
main screen.
2.
press the button to select the time value display state.
3. The distance (DIST): cumulative calculation movement from the 0.0-999.9, the user can press
the button to select the value of the distance display.
4. Calories (CAL): shows that the cumulative consumption of calories from 0.0-9999, the user
can press the button to select the value of the state of the display value. Note: this data is only
a rough description and cannot be used for medical purposes.
5. The speed (SPEED): show the current speed of the athlete, the value of 0.0-999.9 km or mile /
hour.
6. Odometer (ODO): The total distance traveled on the bike 0-9999 km.
7. Pulse (PUL): heart rate, 40-240 times /minute Note: this data is only a rough description and
must not be used for medical purposes.
8. Reset: hold down the button for about 3 seconds, all the values will be returned to the "0", the
function can be reset.
To Previous Page
Loading...