Ascend SE - Required Maintenance; Daily Maintenance Checks; Weekly Maintenance Tasks; Monthly;Usage-Based Maintenance

5
ASCEND SE MAGNETIC SPIN BIKE
Equipment must be regularly examined for damage and repairs. The owner is responsible to
make sure that regular maintenance is done. Worn or damaged components must be
repaired or replaced immediately.
Only manufacturer supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable, or dislodged, replace the labels.
If purchased in US/Canada, contact Customer Service for replacement labels. If purchased
outside US/Canada, contact your local distributor for them.
Since this machine operates with a fixed gear, do not back, or reverse, pedal. Doing so may
loosen the Pedals, which could result in damage to the machine and/or injury to the user.
Never operate this machine with loose Pedals.
For instructions to replace the following parts, please refer to the Assembly Manual
Daily Maintenance
Note: Do not use petroleum-based products.
Silicone lubricant is not intended for human consumption. Keep out of reach of children.
Store in a safe place.
Check pedals and tighten as necessary.
Weekly Maintenance
Monthly or after 20 hours
Check crank arms and tighten as necessary. Make sure all bolts and screws are tight.
Tighten as necessary.
Check the drive belt tension and adjust if necessary.
Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not use
if found in this condition. Repair or replace all parts at the first sign of wear or damage. Make sure
adjustment knobs are tight. Tighten as necessary. After each workout, use a damp cloth to wipe your
machine and Console free of moisture.
NOTICE: If necessary, only use a mild dish soap with a soft cloth to clean the Console. Do not clean
with a petroleum-based solvent, automotive cleaner, or any product that contains ammonia. Do not
clean the Console in direct sunlight or at high temperatures. Be sure to keep the Console free of
moisture.
Clean the machine to remove any dust, dirt, or grime from the surfaces.
Check for smooth seat operation. If needed, sparingly apply a thin coating of silicone lube to ease
operation.
REQUIRED MAINTENANCE