Page 4 of 4 I&M No. V_5993_R8
©
ASCO Valve, Inc.
50 Hanover Road, Florham Park, New Jersey 07932 www.ascovalve.com
Wrenching fl ats for
special open end wrench
order No. 168-146-1
(Alternate Wrench)
solenoid valve
sub-assembly
housing
wrenching fl ats
core assembly with core
spring and rider rings (2)
valve body
CAUTION
Do not damage valve
seat in any manner
bleed hole
Locate bleed hole in
diaphragm assembly
approximately 30°
from valve outlet
valve bonnet
bonnet screw
Part Name
Solenoid Base
Sub-Assembly
Bonnet Screws
TorqueChart
Torque Value
Torque Value
Newton-Meters
40,7±6,8
11,3±1,1
Pin holes for special wrench
adapter supplied in ASCO
Rebuild Kit. For wrench adapter
only, order No. K218-949
(Standard Wrench)
1/2" NPT conduit
connection
bonnet gasket
body gasket
diaphragm assembly
diaphragm spring
(wide end to face
valve bonnet)
See Note1
Figure 2. Series 8215C DC Construction
Indicates Parts Supplied
in ASCO Rebuild Kit
30±5 ft-lbs
100±10 in-lbs
Note1: For 8215083, the
spring is assembled in
reverse of what is shown.
To Previous Page
Loading...
Need help?
General
