GB
3
Ascom 914T is a robust pocket text receiver used in system 900.
The receiver has a two-line display and shows 2 x 12 characters
at the same time. It can receive messages of up to 120 characters
in each message. The receiver has a memory for 10 messages
with altogether 480 characters. Six call numbers can be
programmed and five of them can be enabled/disabled. The
pocket receiver is designed for use in tough environments and
where there is a need for long text presentations.
Note: Your receiver can have functions other than described
here, depending on the pre-programmed parameters.
Turning the receiver ON
One short press on the Function button. The identity is shown in
the display.
Turning the receiver OFF
Two long presses on the Function button.
Scrolling through messages
One short press on the Function button.
Erasing messages
One long press on the Function button until ******** appears.
Accepting a message
One short press on the Function button, stops flashing.
Product presentation
Functions
Characters per message 120
Messages stored 10
Characters in memory 480
Group paging numbers 5
Absence indication Yes
Time stamp Yes
Time display Yes
Out of range indication Yes
Vibrator option
Basic functions
To Next Page
Loading...
Need help?
General