Need help?Do you have a question about the ASCOM 914T and is the answer not in the manual?
General| Frequency Range | 400-470 MHz |
|---|---|
| Modulation | FM |
| Power Supply | 7.2V DC |
| Channel Spacing | 25 kHz / 12.5 kHz |
| Sensitivity | 0.25 μV (12 dB SINAD) |
Short press the Function button to turn the receiver on. Identity is shown on the display.
Perform two long presses on the Function button to turn the receiver off.
Use a short press on the Function button to scroll between received messages.
Press and hold the Function button until ******** appears to erase messages.
A short press on the Function button stops a flashing message, acknowledging it.
Long press the Function button when identity is displayed to access settings. Short press scrolls, long press confirms.
Navigate through settings like Tone, Volume, and Call Number using button presses.
Access functions like volume control, call number display, and beep settings via the sub-menu.
Device complies with Part 15 of FCC Rules. Operation subject to two conditions: no harmful interference and acceptance of received interference.
Unauthorized modifications void FCC authority to operate the equipment.
To Next Page
