ASCOM 914T User Manual

GB
5
• Rotates the display 180° (LCD)
• Programmable via radio
• Exit to identity mode
One long press enables/disables.
Pagings, originally intended for someone else, can be received by
your Ascom 914T by either five extra paging numbers, or when
the call has been automatically diverted to your receiver. The
original number is shown at the end of the message.
means that the call was received by one of the five extra
paging numbers.
means that the call has been diverted to your pager.
When the receiver is placed in a storage/charging rack with
absence indication, anyone paging the receiver automatically
receives indication of absence. The person sending the paging is
thus informed that you cannot be reached at present.
By using the screensaver, a longer battery life is ensured. The
screensaver function is pre-programmed and shuts the display off
after a pre-set time. To activate the display again, press the
button. An incoming message turns the screensaver off
automatically. After reading the message, it is important to press
the button to return to ID mode. By this, the screensaver
function is reactivated.
When the symbol is displayed, you are probably outside the
coverage area. The symbol disappears when the receiver is within
the coverage area again.
The symbol is also shown if the internal error monitoring
function identifies an error.
Note that your Ascom 914T may not have all these functions and
features depending on parameter settings.
Call diversion
Absence indication
Screensaver
Out of range/Error indication

ASCOM 914T Specifications

General

Brand	ASCOM
Model	914T
Category	Receiver
Language	English