ASCOM D62 - Basic Functions

GB
5
Switch the handset on/off
Press and hold until the question “Switch on/off?” is
displayed, press “Yes”/”No”.
Make a call
Dialling can be made in the following ways:
• In idle mode, enter the number and press , or the soft key
“Call”.
• Press and select number from the Call list.
• Press a pre-programmed Hot key
1
or Soft key.
• Dial a number from the local phonebook. Enter the Contacts
menu, select “Call contact” and select the name from the
list, press “Call” or .
• Dial a number from the Central phonebook. Enter the
Contacts menu, select Central phonebook > Search by
name, Search by number, or Last result. Press “Search” and
then press , or “Call”.
Answer/End a call
When the ring signal sounds, press to answer.
To end the call, press .
Reject a call
When the ring signal sounds; press . Call information will be
stored in the Call list.
Turn loudspeaking function on/off
During a call, press the left Soft key to turn the loudspeaking
function on/off.
Basic functions
1.The alphanumeric keys can be programmed with a telephone number