Safety Instructions Ascom d43/d63 DECT Handsets
English 5
English
Safety Instructions
Ascom d43/d63 DECT Handsets
Intended use
The Ascom DECT Handset d43 and d63 are user-friendly
handsets, designed to facilitate efficient and dependable
communication.
Main features include voice- and data communication over DECT.
The handsets are powered by a rechargeable battery, and is
charged by a Desktop Charger, Charging Rack, or a Battery Pack
Charger.
NOTE: Product Designator for regulatory purposes of the Ascom
DECT Handset d43 is DH6 and d63 is DH7.
Regulatory Information (EU/EFTA)
For safe and efficient operation of the handset, observe all
necessary safety precautions when using the handset. Follow the
operating instructions and adhere to all warnings and safety
precautions located on the product, and in the User Manual.
This product shall only be used with the following batteries:
Desktop chargers must be connected with the following power
supplies provided by the manufacturer:
• DC3: Unifive UCE305-0508, Friwo FW7600/05, or PSAI05E-
050 — Power supply unit AC: 100V-240V, DC: 5V/0.65A
• DC3: Phihong PSAC05R-050 or PSAC05R-050L6-R — Power
supply unit AC: 100V-240V, DC: 5V/1A
• DC4: Unifive UIA312-0520 or UNI312-0520 — Power supply
unit AC: 100V-240V, DC: 5V/2A
The power supply is always provided with the charger and cannot
be ordered separately.
NOTE: To fulfil Regulatory requirements the above accessories
must be used.
d43:
Art.No. 660177 Battery
d63:
Art.No. 660497 Battery
Art.No. 660507 Battery
To Next Page
Loading...
Need help?
General
