ASDA tech ATA22AA012A - Station Information and Presets; Displaying Station Information; Manual Storing of DAB Stations; Selecting Preset DAB Stations

To Next Page

To Previous Page

DISPLAYING STATION INFORMATION

1. Select a DAB station.

2. During DAB/DAB+ radio playback, press Menu

repeatedly to display the following information (if

available):

• Ensemble

• Frequency

• Signal frequency error

• Audio state and bit rate

• Time

• Date

• Radio text

• Signal strength

• Programme type

• Power status (Mains or battery)

MANUAL STORING DAB STATIONS

You can store up to 30 preset DAB/DAB+ stations.

1. Select the desired station.

2. Press and hold Preset for one second and then conﬁrm

by pushing Select so that <Preset 1 stored> appears on

the display.

3. Repeat steps 1 to 2 to store more DAB/DAB+ stations.

4. Or you can fast preset the favorite top 3 stations by

press and hold the 1-2-3 button for approximately

list is displayed.

Note: If there is already an existing DAB station stored

under a preset, it will be over written when you store the

new station.

SELECTING PRESET DAB STATIONS

1. Press Standby/Mode to select the DAB/DAB+ mode.

2. Press Preset to access the Preset menu ”Preset Recall”

<#: stored station name>.

3. Use the buttons Prev or Next to select a preset number

and conﬁrm your selection by pressing Select.