8. Use the Prev or Next button to select the [Source] item
to set the alarm source and confirm with Select. Use
the Prev or Next buttons to select [Digital Radio] (DAB
radio), [FM] or [Buzzer] and confirm with Select. If DAB
radio or FM radio is selected, the currently selected
station is adopted. The menu item [Preset] therefore
shows [Last listened].
9. Use the Prev or Next button to select the [Volume] item
to set the alarm volume and confirm with Select. Select
the volume with the Prev or Next button and confirm
with Select.
10. When you have made all the settings, press the Menu/
Info button to exit the alarm menu. The alarm menu is
also left automatically 10 seconds after the last setting
was done.
ALARM REPEAT
When the alarm sounds, press Select to select the
SWITCHING OFF THE ALARM TONE
When the alarm sounds, press the Alarm button and the
BLUETOOTH®
This mode allows you to use the radio as a speaker for an
external device (e.g. mobile phone or MP3 player). The
signal is transmitted wirelessly via Bluetooth®.
Note
Before playback, you must pair the radio (in this case the
Bluetooth® receiver) and the device (transmitter).
15~120minutes snooze period.
16
To Next Page
Loading...