DAB RADIO
Fig.
Press Standby/Mode to select DAB mode.
When the radio is switched on for the first
time, it will automatically do a full scan of DAB/
DAB+ stations. The list of stations is then stored,
eliminating the need for another full scan when
the radio is turned on next time.
When the scan is complete, the stations are stored
in alphabetical order. The first available station will
be played back.
Note
If there is no DAB reception at any time, change
the position of the unit or adjust the antenna.
CHANGING DAB/DAB+ STATIONS
1. Press the buttons Prev or Next in DAB mode to navigate
available DAB/DAB+ stations.
2. Press Select to confirm.
DAB MODE-AUTO SCAN
Long press the button Menu in DAB mode and then the
buttons Prev or Next buttons until <Full scan> appears on
the display. Press Select to confirm.
The unit scans all available DAB/DAB+ stations and plays
the first available station. Alternative, you can activate the
auto scan function by pressing Scan.
Note
New stations and services are added to the stored DAB/
DAB+ stations. In order to make new DAB/DAB+ stations
and services available on your radio, run a full scan at
regular intervals.
9
To Next Page
Loading...