Aseko ASIN Aqua - ASIN AQUA Installation; Installation Distances and Requirements

EN
8
40 °C
max.
5 °C
min.
3
0
c
m
3
0
c
m
3
0
c
m
3
0
c
m
1
5
0
c
m
8,1 cm
ø
8 mm
ø
8 mm
m
a
x
2 m
m
a
x
8 m
ASIN AQUA installation
ASIN AQUA is to be wall mounted in dry and dust-free environment with
temperature ranging from +5 °C to +40 °C. The location must be selected so
that there is at least 30 cm of free space on all sides and a height above the fl oor
was max. 150 cm. Use the screws supplied with ASIN AQUA for fastening.
Maximum distance of injection valves
from peristaltic
ASIN AQUA pumps must not exceed
8 m.
Vertical distance between
ASIN AQUA and the bottom
of the tanks must not exceed a distance of
2 m.
WARNING
The temperature at the installation site should be permanently between
+5 ° and + 40 ° C. Humidity max 70% RH.
Direct sunlight, high humidity and dust can lead to damage ASIN AQUA.
SWIMMING POOL WATER
ASIN AQUA must be installed on
fresh water
reated by
ter
reated by
INORGANIC
superchlorination agent (
SUPERCHLOR
# 13120).
Do not use organic chlorine!
Ensure that the water in the pool
DOES NOT CONTAIN STABILIZERS
(CYANURIC ACID)
and other impurities!