Need help?Do you have a question about the Aseko ASIN Aqua and is the answer not in the manual?
General| Temperature measurement | Yes |
|---|---|
| Self-cleaning | Yes |
| pH control | Yes |
| Redox control | Yes |
| Control via web interface | Yes |
| Mobile app | Yes |
| Type | Saltwater chlorinator |
Hazards from unqualified personnel, leading to injury and material damage.
Risks of chemical overdosing due to probe failure or errors, causing harm.
Risk of poisonous gas from dosing into standing water with specific chemical combinations.
Hazards from not following informational text, leading to severe injury or damage.
Risk of chlorine/bromine overdosing if disinfection starts before pH is stable.
Safe handling of chemicals, use of PPE, and avoiding mixing agents.
Explains chlorine and pH control and dosing for pool water quality management.
Specifies maximum distances for injection valves and vertical placement.
Connecting to mains power, RCD protection requirement, and warnings.
Steps for testing outputs, checking connections, and monitoring flow.
Methods for calibrating the pH probe using buffers or a colorimeter.
Entering manually measured chlorine values for calibration.
Messages for chlorine/pH agent running out or not changing.
Troubleshooting issues with dosing pumps and valves.
Diagnosing and resolving issues related to water flow and probe functionality.
System stops pH regulation for 2 hours due to rapid pH changes.
Handling notifications for pH values outside calibration limits.
Troubleshooting CLF probe calibration problems like low sensitivity.
To Next Page
