Aseko ASIN Aqua - Probe Installation

EN
9
CLF probe
# 12052
pH probe
Long Life
#12012
Redox probe
Long Life
#12016
Probe wrench
Probe installation
Carefully insert the
CLF or Redox probe
into the well on the left.
Tighten by hand or with the included plastic probe wrench.
Connect the connector (marked in yellow)
Carefully insert the
pH probe
into the well on the right. Tighten by hand or with
the included plastic probe wrench. Connect the connector (marked in blue).
WARNING
Tighten the probes only by hand or with the enclosed plastic wrench.
Do not use pliers or other tools!
1
1 2
2