ASEPCO PN05 - Pneumatic Actuator Maintenance (PNXX AJS Series)

6. Install the cap over the screw using a No. 14 drilled spanner screwdriver.
Step 5: Replace the diaphragm
Follow the instructions for "Install an elastomer diaphragm" on page11 or "Install a PTFE
diaphragm" on page12.
8.2 Maintaining a pneumatic actuator
(a) PNXX AJS series
Step 1: Remove the actuator and diaphragm assembly from the valve
Step 2: Remove the diaphragm
Follow the instructions for "Remove the diaphragm" on page17.
m-radialdiaphragmvalve-en-02 23