EasyManua.ls Logo

Ash Fusion - Maintenance; Technical Description

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 15
The battery will power the unit for around 3 hours
depending on the backlight brightness. So, to extend
battery time, use the lowest backlight level you can
comfortably read with.
A full recharge takes approximately 4hours. The
Fusion will charge when the power cable is in; it does
not have to be switched on and it will also recharge
during normal use with the power cable attached.
The battery cannot “overcharge” and does not have to
be fully discharged before recharging.
Do not dispose of the battery in a fire or use above
40°C (100°F). Do not disassemble the battery. If
the battery is overheated it can release lithium
metal which is highly reactive; this could cause a
fire or, in extreme circumstances, cause the
battery to explode.