Page 8
Main Unit Controls
Power Button: Press to power-on the unit. Press
again to power off. The unit will also be powered off
by closing the display lid.
The last used settings are stored at power off and are
restored when the unit is switched on again.
Rotary Knob: The central control knob can be
rotated freely in both directions and pressed.
Normally it controls the image brightness.
Menu
Press and hold the rotary knob for three seconds to
access the menu. By rotating the knob, you can
navigate through the menu, pressing to accept an
option.
An overview of the menu system appears overleaf.
Each sub-menu is explained in the subsequent
sections.
All sub-menus have an exit icon,
, select it to exit
the menu. Some menus offer an on/off choice; select
or as appropriate to confirm your selection.
To Next Page
Loading...