© 2023 United States Stove Company
7
INSTALLATION
£
>
£
>
£
>
£
>
£
>
>
£
>
£
>
†
‡
E
A
A
H
H
I
K
J
X
X
C
F
INSIDE
CORNER DETAIL
FIXED
CLOSED
FIXED
CLOSED
OPERABLE
OPERABLE
VENT TERMINAL
X
AIR SUPPLY INLET
AREA WHERE TERMINAL IS NOT PERMITED
This appliance may be installed in an aftermarket,
permanently located, manufactured home (USA
only) or mobile home, where not prohibited by local
codes. This appliance is only for use with the type
of gas indicated on the rating plate. This appliance
is not convertible for use with other gases, unless a
certied kit is used.
IMPORTANT:
THIS APPLIANCE SHOULD ONLY BE
INSTALLATION MUST CONFORM WITH LOCAL
CODES OR, IN THE ABSENCE OF LOCAL CODES,
WITH THE NATIONAL FUEL GAS CODE, ANSI
A manufactured home (USA only) or mobile
home OEM installation must conform with the
Manufactured Home Construction and Safety
Standard, Title 24 CFR, Part 3280, or, when such
standard is not applicable, the Standard for
Manufactured Home Installations, ANSI Z 225.1, or
Standard for Gas Equipped Recreational Vehicles
and Mobile Housing, CSA Z 240.4.
IMPORTANT:
• THE APPLIANCE AREA MUST BE KEPT
CLEAR AND FREE FROM COMBUSTIBLE
MATERIALS, GASOLINE, AND OTHER
• DUE TO HIGH TEMPERATURES, THE
APPLIANCE SHOULD BE LOCATED OUT OF
TRAFFIC AND AWAY FROM FURNITURE
• CHILDREN AND ADULTS SHOULD BE
ALERTED TO THE HAZARDS OF HIGH
SURFACE TEMPERATURE AND SHOULD
STAY AWAY TO AVOID BURNS OR CLOTHING
• YOUNG CHILDREN SHOULD BE CAREFULLY
SUPERVISED WHEN THEY ARE IN THE SAME
• CLOTHING OR OTHER FLAMMABLE
MATERIAL SHOULD NOT BE PLACED ON OR
• ANY SAFETY SCREEN OR GUARD REMOVED
FOR SERVICING AN APPLIANCE MUST BE
REPLACED PRIOR TO OPERATING THE
Figure 7
To Next Page
Loading...
