Ashly IS Series - Accessory Installation; IS-JP2 Joining Bracket Install; IS-FWM Flush Wall Mount Install

face
plate
face
plate
face
plate
2 31 3
face
plate
17
IS Series + SP 12.1P Operating Manual
IS-JP2 Joining Bracket Install IS-FW Joining Bracket Install
NOTE: When joining two IS
speakers invert the upper
speaker as shown below.
Easy peasy. Use correct fasteners for
the wall type. Align to a wall stud when
possible.
And remember
to set the
Impedance switch
before mounting.
Easy peasy. Use correct fasteners for
the wall type. Align to a wall stud when
possible.
Easy peasy. Use correct fasteners for
the wall type. Align to a wall stud when
possible.
Be sure to securely attach the safety cable.
IS-FWMIS-JP2