Ashly IS Series - Ashly Software Integration; AquaControl and Protea Presets for IS Speakers

7
IS Series + SP 12.1P Operating Manual
Ashly AquaControl (via
AquaControl™)
and Protēa™ software presets
for IS Speakers
Audio performance, including directivity and
frequency response of IS Series speakers can
be enhanced when used in conjunction with:
• mXa-1502 mixer amplifier
• Pêma amplifiers
• ne amplifiers (pe version only)
• nXp amplifiers
• ne DSP system and matrix processors
• ne 24.24m DSP matrix processor
• SP series DSP loudspeaker processors
The various capabilities and software used
are shown as follows:
Ashly Product
Ashly
Software
Directivity-
weighted,
optimized linear
frequency
response
Universal
crossover
implementation
for use between
subwoofers
and full-range
loudspeakers
FIR-corrected,
linear phase
response above
about 300 Hz
Basic
loudspeaker
processing
mXa-1502 AquaControl
✔ ✔ ✔
N/A
Pêma amplifiers Protêa™
✔ ✔ ✔
N/A
ne amplifier
(pe version)
Protêa™
✔ ✔ ✔
N/A
nXp amplifiers Protêa™
✔ ✔ ✔
N/A
ne system and
matrix processors
Protêa™
✔ ✔ ✔
N/A
ne 24.24m DSP
matrix processor
Protêa™
✔ ✽
–
N/A
SP series speaker
processors
Protêa™
–
✽
–
✤
✤ Basic loudspeaker processing is defined as basic EQ (4-Band PEQ) approximating the appropriate
curve, plus Delay. No advanced EQ or FIR filters.
✽ HPF/LPF only