78
PROGRAMS AND OPTIONS FOR THE W600 AND W620
Spin drying (W600)
The normal spin drying speed is 1 000 rpm.
With the
800
button you can select the lower
spin dry speed of 800 rpm.
If you want the program to run without spin dry-
ing, press the
button.
7
Super rinse
Adds from 2 to 4 extra rinses (depending on the
market) to the programs Heavy wash, Normal
wash and Fast wash. Adds 2 extra rinses to the
other programs.
E
2
= Economy and Efficiency
If you choose this option you lengthen the time
of the main wash by about 22 minutes. You can
either choose an energy-saving variant without
affecting the quality of the wash, or you can choose
another variant that provides an extremely effi-
cient program.
You can increase the washing power without in-
creasing the wash temperature by pressing
E
2
.
This gives you an energy-saving program that in
no way reduces the quality of the wash.
Press
E
2
and select a higher temperature. Then
you get an even more efficient wash program.
Can only be selected for the Heavy wash, Nor-
mal wash and Fast wash programs.
5h
Delayed starting (W620)
If you press this button the machine will start 5
hours after you start the wash program.
IMPORTANT
To register this option you must first press the
main power button, then press
5h
and after
that choose your program. The program knob
has to be at the zero position (straight up) when
the main power button is pressed.
Altering settings or changing the program
Press the option buttons in or out to make the
alterations, and turn the program knob to the
desired program.
IMPORTANT (W620)
To change the Delayed starting option you must
first set the program knob to the zero position
(pointing straight up), then press the
5h
but-
ton, and after that turn the program knob to the
desired program position.
To Next Page
