15
Press Start/Stop
The dishwasher will now start. It manages the
entire wash automatically. Ensure that the door
is properly closed or the machine will not start.
Changing options
If you want to change program after having star-
ted the machine, press the Start/Stop button for
three seconds. Then select a new program and
then press the Start/Stop button again.
Do you want to load more dishes?
Carefully open the door; the machine will stops
automatically, put in the dishes, close the door
and the dishwasher will continue from where it
left off.
If the machine is switched off from
the main switch
(or in the event of a power cut) before the wash-
ing program has been completed, the interrup-
ted program will continue when power comes
back on.
NB!
If the power is switched off, or if the door is open
for more than 2 minutes during drying, the pro-
gram isinterrupted.
After dishwashing
Once the machine has finished, it only draws
standby current. Turn off the water tap if the
machine is not to be used for an extended pe-
riod, such as during vacations, for example.
Basic Course
To Next Page
Loading...
