To Next PageTo Next PageWhat to do if Asko D5434 Dishwasher leaves spots after washing?
If your Asko Dishwasher leaves spots after washing, especially from lipstick or tea, try using a detergent with a bleaching agent.
Why Asko D5434 Dishwasher leaves spots or films on the dishes?
Spots or films on dishes washed in your Asko Dishwasher can result from an incorrect rinse aid dosage setting. Also, washing crystal at too high a temperature or using too much detergent can cause etching. Wash crystal at a low temperature with a conservative amount of detergent.
What to do if my Asko Dishwasher does not start?
If your Asko Dishwasher isn't starting, there are several things you can check: * Make sure the main power switch is turned on. * Ensure the door is properly closed. * Check if a fuse/circuit breaker has been tripped. * Verify the plug is securely plugged into the wall socket. * Confirm that the water tap is turned on. * Check for any overflow/leaks. * Also, ensure that the Delayed start option has not been selected.
What to do if Asko D5434 Dishwasher leaves spots on stainless steel?
If you notice spots on stainless steel or silver items after using your Asko Dishwasher, it could be due to certain foods like mustard, mayonnaise, lemon, vinegar, salt, and dressings left on the items for too long; rinse these off before dishwashing or use the Rinse & Hold program. Also, prevent direct contact between stainless steel and silver items during dishwashing.
How to remove spots after washing in Asko Dishwasher?
If you find spots left after washing in your Asko Dishwasher, especially from lipstick or tea, try using a detergent with a bleaching agent.
How to improve drying in Asko D5434 Dishwasher?
If the dishes in your Asko Dishwasher are not drying adequately, try these solutions: Activate the Drying option. Ensure the dishwasher is fully loaded. Check and top up the rinse aid or increase its dosage. Once the program has finished, open the door a little to assist drying.
Why does my Asko D5434 leave spots on dishes?
If your Asko Dishwasher leaves spots or films on the dishes, it could be due to an incorrect rinse aid dosage setting. Refer to the Rinse aid and Settings sections for adjustment. Also, too high a temperature or too much detergent can cause etching on crystal. To prevent this, wash crystal at a low temperature with a conservative amount of detergent.
Why are my dishes not dry enough in Asko Dishwasher?
If your dishes aren't drying properly, activate the Long dry option. Ensure the dishwasher is fully loaded. Check the rinse aid level and dosage, topping up if necessary or increasing the dosage. You can also open the door a little once the program has finished.
What to do if water remains in Asko D5434 Dishwasher above the filters?
If water remains in your Asko Dishwasher above the filters, it could be due to a blocked drain hose. Loosen the drain hose and check for debris. Also, ensure there are no kinks in the drain hose and that the filters are not blocked. Check for debris in the drain pump.
How to solve the problem of Asko D5434 not drying enough?
If your dishes are not drying sufficiently in your Asko Dishwasher, try activating the Long dry option. Make sure the dishwasher is fully loaded. Check and top up the rinse aid or increase its dosage if it's too low. You may also open the door a little once the program has finished.
General| Brand | Asko |
|---|---|
| Model | D5434 |
| Category | Dishwasher |
| Language | English |
Read instructions before use, especially safety, child safety, and dishwashing.
General safety precautions for operating the dishwasher safely and correctly.
Precautions for children around the dishwasher and during use.
Step-by-step guide on loading upper/lower baskets and cutlery.
Guidance on adding detergent based on water hardness and packaging.
How to choose a wash program using the program selector.
How to select additional options like Temperature, Drying, Delayed start.
Step-by-step guide to access the settings.
Error code F:10 indicates overfilling, requires service.
Error code F:11 indicates water outlet fault, check troubleshooting.
Error code F:12 indicates water inlet fault, check tap and connections.
Error code F:40 indicates inlet valve leakage, shut off water and call service.
Possible causes and actions for dishes not being clean.
Reasons and solutions for the dishwasher not starting.
Causes and actions for water remaining in the dishwasher.
Reasons and solutions for dishes not drying properly.
Crucial safety precautions for performing the installation.
Step-by-step guide to adjust height and position the machine.
Instructions for connecting the drainage hose correctly.
Instructions for connecting the water supply hose.
Information and precautions for electrical connection.
Advice to check troubleshooting and note type/serial numbers before contacting service.
