Asko D5904 - Page 11

DescriptionSettingsOptionsButton press
For adjusting the contrast of the display on the
panel.
LCD contrast
(Display on the panel)
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
Rinse aid dosage setting.Rinse aid
(Off)
(Low dosage)
(High dosage)
Press Start/Stop to save the setting value and continue to the next setting.
The display on the front shows the current water
temperature in Celsius or Fahrenheit for the Sani
A and Sani B programs.
Temperature unit
(certain models only)
(Off)
(°C)
(°F)
Press Start/Stop to exit the settings menu.
11