Asko DBI663PHS User Manual

Before washing for the
first time
1. Checking water hardness
Contact the local water utility to check the water hardness in your area.
This is important to determine how much detergent and rinse aid to
use.
In general, more rinse aid and detergent are needed for hard water.
2. Basic settings
To switch on the dishwasher, press and hold the main power switch
until the display lights up.
"Welcome to your new ASKO. This is a first time set up." is shown
on the display. It is important that you choose the right settings to
ensure good dishwashing results.
Confirm setting
Select setting
Main power switch
Settings
Language1
Select the language to be shown on the display.
Rinse aid 0/1/2/3/4/52
Use rinse aid to improve wash and dry times. Also use rinse aid to
achieve clear and spotless results.
Select rinse aid dosage. The rinse aid dispenser can be adjusted
between 0 (Off) and 5 (High dosage).
Pre-selected at factory: 5
To change the chosen setting, see the chapter Settings.
4

Asko DBI663PHS Specifications

General

Style	built in
Color	stainless steel
Load Capacity	16 place settings
Number of Cycles	normal wash, eco wash, hygiene wash, time program, plastic wash, rinse and hold, sanitation wash, upper half, lower half, crystal glass, self-cleaning; 11
Drying Type	turbo drying; vented
Noise level	44 dba
Control Type	touchpad
Delay Start	yes
Spray Arms	3
Water Filter	yes
Leak Protection	no
Water Softener	no
Food Disposer	no
Sanitize Settings	no
Half Load	yes
Wi-Fi	no
Smart Home	no
Remote Control	no
Voltage	120 volts
Frequency	60 hz
Current	15 a

Weight and Dimensions

Depth	22 inch
Height	33 3/4 inch
Width	23 7/8 inch
Net Weight	115 lbs.