EasyManuals Logo

Asko DBI663PHS User Manual

Asko DBI663PHS
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
3. Top up with rinse aid
Use rinse aid to improve wash and dry times. Also use rinse aid to
achieve clear and spotless results.
Press to open
1 Open the rinse aid compartment lid.
2 Carefully top up with rinse aid. Only add rinse aid to the level marked
max.
3 Wipe up any spilled rinse aid around the compartment.
4 Close the lid firmly.
Add rinse aid
When the rinse aid needs topping up, the above symbol lights on the
display.
After topping up, it may take a while before the symbol goes out.
NOTE!
Increase the rinse aid dosage:
If the dishes have water marks.
Reduce the rinse aid dosage:
If the dishes have a sticky white/blue film.
If the dishes are streaked.
Heavy foaming. If you have very soft water, the rinse aid can be
diluted 50:50 with water.
Loading the dishwasher
Energy-efficient dishwashing
Run programs only with a full load
Wait until the dishwasher is fully loaded before running a program, this
way you save energy. Use the Rinse and hold program to rinse the
dishes if there are any unpleasant odors while you wait for the
dishwasher to become fully loaded.
Run programs at a lower temperature
If the dishes are only lightly soiled, you can select a program with a
low temperature.
Select Green mode
The dishwasher has different program modes. To save energy and
water, use Green mode.
Better drying results are achieved if you open the door a little once the
program has ended. (If the dishwasher is built-in, the surrounding
furnishings must be resistant to any condensation from the dishwasher.)
Do not rinse under running water
Simply scrape off large food particles before loading the dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Connect to cold water
Connect the dishwasher to the cold water supply if the building is
heated using oil, electricity, or gas.
Connection to hot water supply
Connect the dishwasher to the hot water supply (max. 160 °F (70 °C))
if the building is heated using an energy-efficient means such as district
heating, solar power, or geothermal power. Choosing a hot water
connection cuts dishwashing times and reduces the dishwasher's
energy consumption.
NOTE!
Do not exceed the permitted water supply temperature. Certain
materials used in some cookware cannot withstand strong heat.
5

Other manuals for Asko DBI663PHS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asko DBI663PHS and is the answer not in the manual?

Asko DBI663PHS Specifications

General IconGeneral
Stylebuilt in
Colorstainless steel
Load Capacity16 place settings
Number of Cyclesnormal wash, eco wash, hygiene wash, time program, plastic wash, rinse and hold, sanitation wash, upper half, lower half, crystal glass, self-cleaning; 11
Drying Typeturbo drying; vented
Noise level44 dba
Control Typetouchpad
Delay Startyes
Spray Arms3
Water Filteryes
Leak Protectionno
Water Softenerno
Food Disposerno
Sanitize Settingsno
Half Loadyes
Wi-Fino
Smart Homeno
Remote Controlno
Voltage120 volts
Frequency60 hz
Current15 a
Weight and Dimensions IconWeight and Dimensions
Depth22 inch
Height33 3/4 inch
Width23 7/8 inch
Net Weight115 lbs.

Related product manuals