422686
• By rotating the knob or holding it in the position to the right or
to the left, the temperature is changed in 5°C steps.
Use this system if you wish to quickly preheat the oven to the
desired temperature. This mode is not appropriate for cooking
food.
• Select the operation mode with the relevant selector knob
.
• The oven starts heating up.
• If required, change the preset temperature.
• When the oven has heated to the preset temperature, the
heating stops, and an intermittent beep sounds which can be
deactivated by pressing any sensor key or rotating the selector
knob; if non of this is done, the beep stops automatically after
one minute.
• The oven is now ready for further cooking.
Rapid oven preheating
14
To Next Page
Loading...
