37
REMOVING AND INSERTING THE OVEN DOOR GLASS PANE
Oven door glass pane can be cleaned from the inside, but it has to be removed fi rst. Remove the oven door (see chapter
”Removing and replacing the oven door”).
1
Slightly lift the supports on the left and right side of
the door (marking 1 on the support) and pull them
away from the glass pane (marking 2 on the support).
2
Hold the door glass pane by the lower edge; slightly
lift it so that it is no longer attached to the support;
and remove it.
3
To remove the third glass pane (only with some
models), lift and remove it. Also remove the rubber
seals on the glass pane.
To replace the glass pane, observe the reverse
order. The markings (semicircle) on the door and the
glass pane should overlap.
To Next Page
Loading...
Need help?
General
